DDM100SCF DIN-rail Energy Meter, Multi-Tariff, 4 Pole/Modular

Nosotros: http://acrel-electrical.es/2-1-4-din-rail-energy-meter-adl200.html

DDM100SCF DIN-rail Energy Meter, Multi-Tariff, 4Pole/Modular

Main Features
1. The 35mm standard DIN- rail installation or front board setting are available for this DIN-rail energymeter multi-tariff (4 pole/modular) whichcomplies with standard DIN EN50022. If you prefer, you can choose thefront boardsetting (mounting holes center distance is63 mm).
2. It has a width offour poles.
3. The LCD cycle displaycan indicate data.
4. Thestandard configuration usesLCD display without backlighting. The LCD displaywith white backlighting is optional. When the power is cut off, amaintenance- free battery can be used for display.
5. This DIN-rail energy metermulti- tariff may select TOU or step tariff.
6. With memory that is not easily lost, the data willbe saved, even after a blackout.
7. Thestandard configuration uses passive pulse output(polarity). Distant passiveimpulse output (non-polarity) may also be selected. Our DDM100SCF series DIN-railenergy meter multi-tariff can be convenientlyconnected with all kinds of AMR systems. Itcomplies with standard IEC 62053-31 and DIN 43864.
8. TheLED indicates power supply state, signal of energy impulse,direction of flow of load current and state rates.
9. This DIN-rail energy metermulti-tariffmeasures single phase two wire active power consumption. It has nothing to do with direction of flowof load current. Itcomplies with standard IEC62053-21 and IEC62052-11.
10. It usesdirect connect operation or through CT or PT and CT.

Optional Function
Optical port or far infrared port,RS 485 output interface (optional) enable remote data transformation,remote -control reading and parameter setting.

Applications
Our DIN-rail energy meter multi-tariff is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
Featuring small size and DIN-rail mounting, it issuitable for installation in distribution boards and small standard enclosures.
It is used inoffice buildings, shopping centers, hotels, airports,metros, etc.
The meter’s LCD shows various consumption data and information.

Technical Specifications

Accuracy Class	Class 1.0
Rated Voltage	110VAC, 120VAC, 220VAC, 230VAC, 240VAC, etc.
Operation Voltage Range	0.7Un-1.3Un
Insulation Capability	AC voltage can withstand 2kV for 1 minute. Impulse voltage can withstand 6kV-1.2/50 μs waveform.
Rated Frequency	50Hz or 60Hz
Rated Current(A)	1.5(6)A, 5(30)A, 5(60)A, 10(40)A, 10(60)A, 20(80)A, 30(100)A, etc.
Operational Current Range	0.05Ib~I max (Direct), 0.02Ib~ I max (with CT)
Starting Current	0.004Ib (Direct), 0.002Ib (with CT)
Power Consumption	Voltage circuit ≤1.0W 5VA, Current circuit ≤1VA(Ib)
Temperature Range	Max. operation temperature -40ºC-- 80ºC; Max. storage temperature -45ºC-- 85ºC
Relative Humidity	≤85%
Service Life	More than 10 years
Dimension	75mm x 88mm x 73mm
Weight	Approx 320g

HUABANG is a DIN-rail energy meter multi-tariff (4 pole/modular)manufacturer, based in China. We offer DIN-rail energymeter multi-tariff (4 pole/modular), electronic energy meter, mechanical energymeter, socket energy meter, etc. Weprovide high quality energy meters at a competitive price. The full chain for manufacturing energymeters can be completed in China,even in one city. Our low manufacturingcost saves your purchasing cost. Furtherdetails of each product are shown in the specific product page.