DDM100TCF Multi-Tariff DIN-rail Energy Meter, 7 Pole/Modular

Nosotros: http://acrel-electrical.es/2-1-4-din-rail-energy-meter-adl200.html

DDM100TCF Multi-Tariff DIN-rail Energy Meter, 7 Pole/Modular

DDM100TCF	Three-phase Four-wire Electronic Multi-tariff DIN-rail Active Energy Meter (7-Pole, LCD Display)
DDM100TEF	Three-phase Four-wire Electronic Multi-tariff DIN-rail Active Energy Meter (7-Pole, LED Display)

Main Features
1. Our multi-tariff DIN-rail energy meter (7pole/modular) uses 35mm standard DIN rail installationor installed by front board. It complies with standard DIN EN50022.
2. It has a width ofseven poles.
3. Thestandard configuration of this multi-tariff DIN-rail energy meter hasone port of passive pulse output (polarity). It may select a distant port of passivepulse output (non-polarity). Itcomplies with standard IEC 62053-31 and DIN 43864.
4. The LED indicates respectively powersupply, impulse and communication state, etc.
5. It can automaticallydetect the direction of trend of load current. If the LED “REV” lights, it means the load currentis reversed.
6. The DDM100TCF multi-tariff DIN-railenergy meter measures three phase four wire active energy consumption. It has nothing to do with direction offlow of load current. Itcomplies with standard IEC62053-21 and IEC62052-11.
7. This multi-tariff DIN-rail energymeter may select two components to measure three phase three wire active energy or two phase three wire active energy.
8. Multi- tariff is available (optional TOU or step tariff).
9. Ananti-tampering function is available.
10. This multi-tariff DIN-rail energymeter can selectoptical port or far infrared port. TheRS 485 output interface (optional) enables remote data transfer,remote –control reading and parameter setting.
11. It usesdirect connect operation or through CT or PT and CT.

Applications
DDM100TCF series multi-tariff DIN-rail energymeter is used to measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net.
The features of small size and DIN-rail mounting make it suitable for installation in distribution boards and small standard enclosures.
It is used in office buildings, shopping centers,apartments, airports, metros, etc.
Our multi-tariff DIN-rail energy meter (7 pole/modular) hasdifferent tariffs to measure energy consumption ofdifferent times.

Technical Specifications

Accuracy	Class 1.0
Rated Voltage(VAC)	357.5/110, 3110/200, 3220/380, 3230/400, 3*240/415,etc.
Operation Voltage Range	Un±20%
Insulation Capability	AC voltage can withstand 2kV for 1 minute. Impulse voltage can withstand 6kV - 1.2/50μs waveform.
Rated Current (A)	1.5(6), 5(30), 10(60), 20(80), 30(100), etc.
Operation Current Range	0.05Ib~ Imax
Starting Current	0.004Ib
Rated Frequency	50Hz or 60Hz
Internal Power Consumption	Voltage circuit ≤1.0W 5VA, Current circuit ≤1VA(Ib)
Impulse Valence Ra	0.5 or 1.0 Wh/imp
Interface	Optical coupler (SO corresponding to DIN 43864)
RS 485 Communication (Optional)	Baud rate: 1200bps (default)
Remote Pulse Output(Optional)	Pulse width: 80ms ± 20ms
Temperature Range	Normal operation temperature -35ºC-- 70ºC Storage temperature -45ºC-- 85ºC Extreme operation temperature -40ºC-- 75ºC
Relative Humidity	≤ 85%
Service Life	More than 10 years
Dimension	125mmx 88mm x 73mm
Weight	Approx 650g

Please advise us if you need any different specifications,we can manufacture special energy meters according to your specialrequirements.

HUABANG is a multi-tariff DIN-rail energy meter (7 pole/modular) manufacturer,based in China. We offer multi-tariff DIN-rail energy meter(7 pole/modular), electronic energy meter, mechanical energy meter, socketenergy meter, etc. We provide highquality energy meters at a competitive price. The full chain for manufacturing energy meters can be completed in China,even in one city. Our low manufacturingcost saves your purchasing cost. Furtherdetails of each product are shown in the specific product page.