DDM100SCFR DIN-rail Energy Meter,Multi-Tariff With Communication Port, 4 Pole/Modular

Nosotros: http://acrel-electrical.es/2-1-4-din-rail-energy-meter-adl200.html

DDM100SCFR DIN-rail Energy Meter, Multi-Tariff with Communication Port,4 Pole/Modular

Main Features
1. The 35mm standard DIN- rail installation or front board settingcan be used by this DIN-rail energy meter multi-tariff with communication port(4pole/modular) which complieswith standard DIN EN50022. If you prefer, you can choose the front boardsetting (mounting holes center distance is63 mm).
2. It has a width of four-poles.
3. The DDM100SCFR has three tariffs. That is 12 daily periods of time,TOU or step tariff. (Please specify the mode you wantwhen ordering.)
4. Ithas maintenance- free backup lithium batteries and a clock. The data willbe saved after a blackout.
5. A cycle display isinstalled in this DIN-rail energy meter multi-tariff with communication port(default). The data displayed can be defined.
6. There is a port of RS485 data communicationused for setting and reading the meter. The standardconfiguration communication agreement complies with standard DL/T645-1997.
7. TheLED indicates respectively power supply state, signal of energy impulse,direction of flow of load current,data communications state and so on.
8. The DDM10SCFR series DIN-railenergy meter multi-tariff with communication port measures single phase two wire active power consumption. It has nothing to dowith direction of flow of load current andcomplies with standard IEC62053-21 and IEC62052-11.
9. It usesdirect connect operation or through CT or PT and CT.

Applications
This DIN-rail energy meter multi-tariff with communicationport is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
The small size and DIN-rail mounting makes it suitable for installation in distribution boards and small standard enclosures.
It is used inoffice buildings, shopping centers, hotels, airports,metros, etc.
For convenient meter-reading, there arefar infrared and RS485 communication module in it.

Technical Specifications

Accuracy Class	Class 1.0
Rated Voltage	110VAC, 120VAC, 220VAC, 230VAC, 240VAC, etc.
Operation Voltage Range	0.7Un-1.3Un
Insulation Capability	AC voltage can withstand 2kV for 1 minute. Impulse voltage can withstand 6kV-1.2/50 μs waveform.
Rated Frequency	50Hz or 60Hz
Rated Current (A)	1.5(6)A, 5(30)A, 5(60)A, 10(40)A, 10(60)A, 20(80)A, 30(100)A, etc.
Operation Current Range	0.05Ib~ I max (Direct), 0.02Ib~ I max (with CT)
Starting Current	0.004Ib (Direct), 0.002Ib (with CT)
Power Consumption	Voltage circuit ≤1.0W 5VA; Current circuit ≤1VA(Ib)
Temperature Range	Max. operation temperature -40ºC-- 80ºC Max. storage temperature -45ºC-- 85ºC
Relative Humidity	≤85%
RS 485 Communication	Baud rate: 1200bps (default)
Remote Pulse Output	Pulse width: 80ms ± 20ms
Infrared Communication (Optional)	Communication distance: ≥4m Communication angle: ≥±15o
Service Life	More than 10 years
Dimension	75mm x 88mm x 73mm
Weight	Approx 320g

*Please tell us if you need any different specifications, we can manufacture special energy meters according to your special requirements.

HUABANG is a DIN-rail energy meter multi-tariff with communicationport (4pole/modular), based in China. We offer DIN-rail energymeter multi-tariff with communication port (4pole/modular), electronic energymeter, mechanical energy meter, socket energy meter, etc. . Weprovide high quality energy meters at a competitive price. The full chain for manufacturing energymeters can be completed in China,even in one city. Our low manufacturingcost saves your purchasing cost. Furtherdetails of each product are shown in the specific product page.